General tips and tricks for installing ÐÓ°ÉPro windows and doors

Ìý
Before:

  • Always use and wear personal protective equipment (PPE).
  • To avoid injuries, at least two people are recommended for installation.
  • Do not store sliding glass door products in the sun or lay flat before or during installation.
  • Before beginning assembly or installation, check your materials to make sure you have all of the suggested tools and the supplied hardware.
  • Inspect the product thoroughly before installation. Do not install product if there is any observable damage or other irregularity.
  • Before installation, confirm door size and rough opening size:
    • Rough opening dimensions should be 1/2 in. larger than door size.
    • Make sure rough opening is plumb, level, and square.
  • If the building has a weather resistant barrier (WRB) installed, prepare the opening according to the WRB manufacturer’s instructions.
  • Make sure the installer reads any and all installation instructions thoroughly.
  • Window and door installation may disturb finished surfaces. Take the appropriate precautions to avoid damaging existing structures.
  • Do not proceed unless you are able to achieve weather-tight installation of a properly functioning product, which includes waiting for the proper weather conditions to assemble or install.

During Installation:

  • Always use a caulkÌýor sealant that is approved and compatible with the windows and doors being installed.
  • Some areas, such as Florida and Texas, require more fasteners than those employed on the physical test unit. For fastener information regarding these areas, visitÌýÌýorÌý.
  • Do not apply sealant in a fashion that plugs the weeps at the sill.
  • Be cautious using PVC cement, as too much could damage the products.

After Installation:

  • With the exception of logo and NFRC labels, all ÐÓ°ÉPro applied labels should remain in place and not be removed (e.g. AAMA labels, warranty labels, warning labels).
  • If there is more work to be done on the job site after window installation, use extra caution around the installed windows and doors to avoid damaging them or negatively impacting the installation.
  • Take great care with any final caulking or trim work.
  • ÐÓ°ÉPro recommends a yearly inspection of its products, both inside and outside of the home. Taking care of sealant joints, hardware, and weather stripping can lengthen the life of the doors and windows and help them continue to function properly.

With these tips and tricks in mind, proceed to the Installation Guides. Choose the guide that corresponds to your product and follow all instructions carefully. NOTE: Failure to follow these recommendations, local requirements, or good building practices may affect your ability to claim remedies under ÐÓ°ÉPro’s warranties.
Homeowner Information Dealer Information Remodeler Information Builder Information
Aluminum Patio Doors

More Helpful Articles

New
Maryland Case Study, ÐÓ°ÉPro Windows and Doors

Contemporary home with ÐÓ°ÉPro windows complements stylish D.C. suburb

If you were to envision a hamlet that combines the best of urban, suburban, and small-town living, it would probably look a lot like Lyon Village in Arlington County, Va.

New Retirement Community Boasts Energy-Efficient ÐÓ°ÉPro Windows

High energy-efficiency ratings can increase the value of your home. Discover one simple way to improve your rating: ENERGY STAR-rated, energy-efficient windows.

harrisburg_case_study1

New Construction Home Is Built-To-Last With ÐÓ°ÉPro Windows

Need windows for a new construction home? Here’s what you need to know about how to find the right new home windows and why ÐÓ°ÉPro Windows and Doors is a great choice.

nazareth_case_study1

ÐÓ°ÉPro Windows' Top-Selling Vinyl Sliding Glass Door Complements Open Floorplan

In historic Nazareth, PA, Tuskes Homes has built over 225 new residences in their Eagles Landing community.

fort_myers_case_study1

ÐÓ°ÉPro Windows Unveils A New Aluminum Sliding Glass Door

It would perhaps be a step too far to suggest that Thomas Edison built Fort Myers, Fla. The city surely would have continued to grow even without the help of its most famous early resident.

webster_case_study

On Lake Ontario, New Windows Enhance View At Upscale Housing Complex

Nearly 78 million baby boomers nationwide are reshaping the housing market by downsizing from heavily-mortgaged homes

lees_summit_case_study1

Vinyl Windows From ÐÓ°ÉPro Adorn St. Jude Dream Home® Near Kansas City, Missouri

Located in the chic neighborhood of Reserve at Stoney Creek in Lee’s Summit, Mo., the St. Jude Dream Home® Kansas City is a beautiful new structure that was recently sold at auction to raise money for St. Jude Children’s Research Hospital.

buffalo_case_study1

ÐÓ°ÉPro's Top-Selling Windows Make A Big Impression On Student Residences in Buffalo

Rising above the Elmwood Village neighborhood of Buffalo, next to the colleges, museums, and cafès that populate the area, a series of student-housing complexes stands ready for its first influx of residents.

New Townhouses With Vinyl Single-Hung Windows From ÐÓ°ÉPro Add Flavor To All-American Libertyville

If you were charged with finding the most American city there is, you’d be hard pressed to come up with a better candidate than Libertyville, Ill.

king_of_prussia_case_study

Energy-Efficient Windows Help Reduce Costs And Improve Aesthetics In Office Building

Window replacement can be a significant expense, but it can also provide an opportunity for dramatic energy savings.

Add a comment

About text formats

Restricted HTML

  • Allowed HTML tags: <a href hreflang> <em> <strong> <cite> <blockquote cite> <code> <ul type> <ol start type> <li> <dl> <dt> <dd> <h2 id> <h3 id> <h4 id> <h5 id> <h6 id>
  • Lines and paragraphs break automatically.
  • Web page addresses and email addresses turn into links automatically.
CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.